Regularly updated list of free VPN servers with IP addresses from Russia.
All these servers belong to Russian users of the VPN Gate project. These servers operate using the services of Russian Internet providers and comply with Russian laws. The site administrator has no relation to these servers.
Configurations for connection
To download, click on the selected server and follow the instructions below. Please inform us about servers that are not working. If the list is not visible on the screen or there is an error — wait a minute and refresh the page.
Instructions for connection
OpenVPN
1. Install the OpenVPN application
To use the configuration files, you need to install the OpenVPN application on your device. To do this, go to the official OpenVPN website or click on the icon with the operating system of your device.
2. Download file
Download any file from the list. You can download all files at once and later switch from one VPN server to another in case of connection problems.
3. Add the downloaded file to the application
To do this, open the OpenVPN application. Click the «File» tab. Click on the «Browse» button. Select the downloaded configuration file from the list of files on your device (in the downloads folder, look for a file with the .ovpn extension). Add the file and click «Connect.»
On a PC, you can simply transfer the downloaded file to the OpenVPN application window.
4. Enable VPN
It usually takes 2 to 5 seconds to connect. If the connection is not established for a long time — try to connect to the next server. Use another configuration file for this purpose.
SSTP
1. Open the Start menu and select Settings (gear icon). In the «Settings» window that opens, select the «Network and Internet» section
2. In the menu on the left, click «VPN» (I advise you to right-click on this button and pin it in the Start menu for easy editing and use of VPN connections in the future)
3. Click on the «Add VPN Connection» button. In the window that appears, fill in the following information:
— Select the VPN provider «Windows (built-in)»
— Select any name for the connection (I recommend making one universal name, such as SSTP-VPN, and changing the server address in the future to avoid creating many connections)
— Select «Secure Socket Tunneling Protocol (SSTP)» as the VPN type.
— In the «Server name or address» field enter the server name (it is copied when you click on the SSTP button on our website under «Configurations for connection»).
— Type of sign-in info is «User name and password» ( User name and password are always the same: vpn )
4. Click on the «Save» button (leave the «Remember my sign-in info» checkbox selected). Now you have a configured VPN connection. To connect to the SSTP VPN server, click on the connection name in the «VPN» section of the Network and Internet settings
You can also connect to the VPN from the taskbar. To do this, look for the «Network» icon in the taskbar. It may look like a Wi-Fi signal icon or a network connection icon. Click on this icon. Next, a drop-down menu with available networks and VPN connections will appear. Select the configured VPN from the list. Click on the «Connect» button. After successful connection, you will see the status «Connected» in the VPN properties
You are now connected to the SSTP VPN server on Windows 10 or Windows 11. If the selected server is not responding, I recommend editing the connection from the VPN section — to do this go back 1-2 steps (click on the connection and select «Advanced Options», «Edit» and then just replace the old server name with the new one, click «Save»)
1. Open the Start menu and click on the gear icon (PC Settings). In the window that appears, click on «Control Panel» in the lower left corner. In the control panel, select «Network and Internet», go to «Network and Sharing Center». In this section, select «Set up a new connection or network».
2. In the window that appears, select «Connect to a workplace» and click «Next». Select «Use my Internet connection (VPN).» Enter the IP address or domain name of the SSTP VPN server in the «Internet Address» field (this data is copied when you click on the SSTP button on our website under «Configurations for connection»), and in the «Destination Name» field, enter the name that will be displayed for this VPN connection (e.g. «SSTP VPN»). Check the «Remember my credentials» box. Click «Next»
3. Now we need to go to the «Change adapter settings» section in the «Network and Sharing Center» window (it is located in the upper left part of the window). In the address bar at the top of the window, right click on the phrase «Network Connections» and select «Copy Address». Move to the desktop and right click on the empty space and select «Paste shortcut». Double-click the icon that appears and return to «Network Connections»
4. Right-click on the previously created SSTP VPN connection and select «Properties». Go to the «Security» tab, select the VPN Type «Secure Socket Tunneling Protocol (SSTP)«, click OK.
5. Now we can connect to SSTP VPN from the «Network Connections» shortcut (right-click and click connect) or from the taskbar. To do this, find the «Network» icon on the taskbar. It may look like a Wi-Fi signal icon or a network connection icon. Click on this icon. Next, a drop-down menu with available networks and VPN connections will appear. Select the configured VPN from the list. Click on the «Connect» button. A menu will open, in it you need to enter your username (vpn), password (vpn) and click OK. After successful connection you will see the status «Connected» in the VPN properties
Now you are connected to the SSTP VPN server on Windows 8.1. If the selected server is not responding, I recommend editing the connection from the «Network Connections» section — to do this, click on the shortcut added in step 3, right-click on the VPN connection and on the first tab replace (after replacing click OK) «Computer name or destination IP address» with any other server name from the list on the site (it is copied by clicking on the SSTP button on our site in the «Configuration files for connection» section).
Make sure you have all the latest updates for Windows 7 installed, otherwise there may be problems with the connection installation.
1. Open the Start menu and select «Control Panel». In the Control Panel, select «Network and Internet», go to «Network and Sharing Center». In this section, select «Set up a new connection or network»
2. In the window that appears, select «Connect to a workplace» and click «Next». Select «Use my internet connection (VPN).» Enter the IP address or domain name of the SSTP VPN server in the «Internet Address» field (this data is copied when you click on the SSTP button on our website under «Connection Configuration Files»), and in the «Destination Name» field, enter the name that will be displayed for this VPN connection (e.g. «SSTP VPN»). Check the «Do not connect now» box. Click «Next.»
3. Enter the user name (vpn) and password (vpn), and check «Remember this password». Click «Create». Close the window that appears. Now we need to go to the «Change adapter settings» section in the «Network and Sharing Center» window (it is located in the upper left part of the window). In the address bar at the top of the window, right click on the phrase «Network Connections» and select «Copy Address». Move to the desktop and right click on the empty space and select «Paste shortcut». Double-click the icon that appears and return to «Network Connections»
4. Right-click on the previously created SSTP VPN connection and select «Properties». Go to the «Security» tab, select the VPN Type «Secure Socket Tunneling Protocol (SSTP)«, click OK.
5. Now we can connect to SSTP VPN from the «Network Connections» shortcut (right-click and click connect) or from the taskbar. To do this, find the «Network» icon on the taskbar. It may look like a Wi-Fi signal icon or a network connection icon. Click on this icon. Next, a drop-down menu with available networks and VPN connections will appear. Select the configured VPN from the list. Click on the «Connect» button. Another window will open, in it, click on «Connect» again. After successful connection, you will see the status «Connected» in the VPN properties
You are now connected to the SSTP VPN server on Windows 7. If the selected server is not responding, I recommend editing the connection from the «Network Connections» section — to do this, click on the shortcut added in step 3, right-click on the VPN connection and on the first tab replace (after replacement click OK) «Computer name or destination IP address» with any other server name from the list on the site (it is copied by clicking on the SSTP button on our site in the «Configuration files for connection» section).
To connect to SSTP VPN on Android, third-party applications are required. I recommend Open SSTP Client (free program)
1. Install Open SSTP Client from Google Play. Launch the application
2. In the «Home» tab, in the «Hostname» field enter the server name (it is copied when you click on the SSTP button on our website under «Configuration files for connection»). In «Username» and «Password», write vpn
3. Connect to the VPN by clicking on the switch button. If the connection is successful, the «Current Status» will change.
If the selected server does not respond, copy the address of another server and paste it into «Hostname»
To connect to SSTP VPN on iOS, third-party apps are required. I recommend SSTP Connect (paid program)
L2TP
1. Open the Start menu and select Settings (gear icon). In the «Settings» window that opens, select the «Network and Internet» section
2. In the menu on the left, click «VPN» (I advise you to right-click on this button and bookmark it in the Start menu for easy editing and use of VPN connections in the future)
3. Click on the «Add VPN Connection» button. In the window that appears, fill in the following information:
— Select the VPN provider «Windows (built-in)»
— Select any name for the connection (I recommend to make one universal name, for example L2TP-VPN, and change the server address in the future, so as not to create many connections)
— Select «L2TP/IPsec with pre-shared key» as the VPN type
— In the «Server name or address» field enter the server name (it is copied when clicking on the L2TP button on our website in the «Configurations for connection» section)
— In the «Pre-shared key» field enter vpn
— Type of sign-in info is «User name and password» ( User name and password are always the same: vpn )
4. Click on the «Save» button (leave the «Remember my sign-in info» checkbox selected). Now you have a configured VPN connection. To connect to the L2TP VPN server, click on the connection name in the «VPN» section of the Network and Internet settings
You can also connect to the VPN from the taskbar. To do this, look for the «Network» icon on the taskbar. It may look like a Wi-Fi signal icon or a network connection icon. Click on this icon. Next, a drop-down menu with available networks and VPN connections will appear. Select the configured VPN from the list. Click on the «Connect» button. After successful connection, you will see the status «Connected» in the VPN properties
You are now connected to the L2TP VPN server on Windows 10 or Windows 11. If the selected server is not responding, I recommend editing the connection from the VPN section — to do this go back 1-2 steps (click on the connection and select «Advanced Options», «Edit» and then just replace the old server name with the new one, click «Save»)
1. Open the Start menu and click on the gear icon (PC Options). In the window that appears, click on «Control Panel» in the lower left corner. In the control panel, select «Network and Internet», go to «Network and Sharing Center». In this section, select «Set up a new connection or network».
2. In the window that appears, select «Connect to a workplace» and click «Next». Select «Use my Internet connection (VPN).» Enter the IP address or domain name of the L2TP VPN server in the «Internet Address» field (this data is copied when you click on the L2TP button on our website under «Configurations for connection»), and in the «Destination Name» field, enter the name that will be displayed for this VPN connection (e.g. «L2TP VPN»). Check the «Remember my credentials» box. Click «Next»
3. Now we need to go to the «Change Adapter Settings» section in the «Network and Sharing Center» window (it is located in the upper left part of the window). In the address bar at the top of the window, right click on the phrase «Network Connections» and select «Copy Address». Move to the desktop and right click on the empty space and select «Paste shortcut». Double-click the icon that appears and return to «Network Connections»
4. Right-click on the previously created L2TP VPN connection, select «Properties». Go to the «Security» tab, select the VPN Type «L2TP Protocol with IPsec (L2TP/IPsec)«, just below click on «Advanced Options», select «Use shared key for authentication«, enter vpn there and click OK in the additional and main windows.
5. Now we can connect to L2TP VPN from the «Network Connections» shortcut (we have to right-click and click connect) or from the taskbar. To do this, find the «Network» icon on the taskbar. It may look like a Wi-Fi signal icon or a network connection icon. Click on this icon. Next, a drop-down menu with available networks and VPN connections will appear. Select the configured VPN from the list. Click on the «Connect» button. A menu will open, in it you need to enter your user name (vpn), password (vpn) and click OK. After successful connection you will see the status «Connected» in the VPN properties
Now you are connected to the L2TP VPN server on Windows 8.1. If the selected server is not responding, I recommend editing the connection from the «Network Connections» section — to do this, click on the shortcut added in step 3, right-click on the VPN connection and on the first tab replace (after replacing click OK) «Computer name or destination IP address» with any other server name from the list on the website (it is copied by clicking on the L2TP button on our website in the «Configuration files for connection» section).
Make sure you have all the latest updates for Windows 7 installed, otherwise there may be problems with the connection installation.
1. Open the Start menu and select «Control Panel». In the Control Panel, select «Network and Internet», go to «Network and Sharing Center». In this section, select «Set up a new connection or network»
2. In the window that appears, select «Connect to a workplace» and click «Next». Select «Use my internet connection (VPN).» Enter the IP address or domain name of the L2TP VPN server in the «Internet Address» field (this data is copied when you click on the L2TP button on our website under «Configurations for connection»), and in the «Destination Name» field, enter the name that will be displayed for this VPN connection (e.g. «L2TP VPN»). Check the «Do not connect now» box. Click «Next.»
3. Enter the user name (vpn) and password (vpn), and check «Remember this password». Click «Create». Close the window that appears. Now we need to go to the «Change adapter settings» section in the «Network and Sharing Center» window (it is located in the upper left part of the window). In the address bar at the top of the window, right click on the phrase «Network Connections» and select «Copy Address». Move to the desktop and right click on the empty space and select «Paste shortcut». Double-click the icon that appears and return to «Network Connections»
4. Right-click on the previously created L2TP VPN connection, select «Properties». Go to the «Security» tab, select VPN Type «Layer 2 Tunneling Protocol (L2TP/IPsec)«, just below that click on «Advanced Settings», select «Use preshared key for authentication«, enter vpn here and click OK in the Advanced and Main windows.
5. Now we can connect to L2TP VPN from the «Network Connections» shortcut (we have to right-click and click connect) or from the taskbar. To do this, find the «Network» icon on the taskbar. It may look like a Wi-Fi signal icon or a network connection icon. Click on this icon. Next, a drop-down menu with available networks and VPN connections will appear. Select the configured VPN from the list. Click on the «Connect» button. Another window will open, in it, click on «Connect» again. After successful connection, you will see the status «Connected» in the VPN properties
Now you are connected to the L2TP VPN server on Windows 7. If the selected server is not responding, I recommend editing the connection from the «Network Connections» section — to do this, click on the shortcut added in step 3, right-click on the VPN connection and on the first tab replace (after replacement click OK) «Computer name or destination IP address» with any other server name from the list on the site (it is copied by clicking on the L2TP button on our site in the «Configuration files for connection» section).
The connection process is slightly different on all devices, but the general scheme is as follows:
1. Go to «Settings» and find the «VPN» section there. Click on the «Add VPN connection» button or on the plus (+) sign to create a new connection
2. Select «L2TP/IPsec PSK» (or «L2TP/IPsec with shared key») in the list of available VPN types, enter a name for the connection (e.g. L2TP VPN), enter the server address (this data is copied when you click on the L2TP button on our website under «Configurations for connection»). In the IPSec Shared Key/Username/Password fields, enter vpn and save the VPN profile
Now you can connect to the L2TP VPN server by selecting it in the list of available VPN connections. If you cannot connect to the selected server, copy another server address from the list and edit the profile by changing the «Server Address»
On different versions of iOS, the connection process is slightly different, but the general scheme is as follows:
1. Go to «Settings» and find the «VPN» section there. Click on the «Add VPN connection» button
2. Select «Type» L2TP, enter a description for the connection (e.g. L2TP VPN), enter the server address in the «Server» field (this data is copied when you click on the L2TP button on our website in the «Connection Configuration Files» section). In the Account/Password/Secret fields, enter vpn and save the VPN profile
Now you can connect to the L2TP VPN server by selecting it in the list of available VPN connections. If you cannot connect to the selected server, then copy another server address from the list and edit the profile by changing the server address
The specific steps may vary slightly depending on the macOS version, but the general procedure should be similar.
1. Open System Settings, go to Network Settings
2. Add a new connection, select «VPN» and then L2TP. Enter a name (e.g. L2TP VPN), enter the server address (this data is copied by clicking on the L2TP button on our website under «Configuration files for connection»), in the User name/Password fields write vpn. Set authentication by preshared key (vpn). Save the profile
Now you can connect to the L2TP VPN server
The procedure may be as follows:
1. Open system settings, go to network settings
2. Add a new VPN connection. Select the L2TP/IPSec with preshared key (PSK) type. Enter a name (e.g. L2TP VPN), enter the server address (this data is copied by clicking on the L2TP button on our website under «Configurations for connection»), in the User name/Password/Key fields write vpn. Save the profile
Now you can connect to the L2TP VPN server
Solving possible problems
Try connecting to a different one. Download a new configuration file and add it to the OpenVPN application. If you are using SSTP or L2TP, copy the address of the other server and replace it in the settings for that connection.
The server you are connecting to is overloaded. Try connecting to another one.
In most cases — the problem is on the VPN server side. Try connecting to another one.
Occurs when trying to connect to some servers. If you see this error several times in a row, connect to another server in the list.
There is a problem with the certificate on the server you are trying to connect to. If this error occurs when connecting to all servers in the list, you should wait a few hours until the problem is fixed. Try connecting via SSTP or L2TP.
If you encounter such a problem — use servers with the IP address in the name.
Delete cookies, clear your browser cache. Alternatively, visit the site in incognito mode or from another browser.